Meetapparatuur

2 producten


  • Envox EEZ Bench Box 3 (BB3) 4-ch – Modular Test & Measurement Solution

    Envox Envox EEZ Bench Box 3 (BB3) 4-ch - Modular Test & Measurement Solution

    Niet op voorraad

    Need a modular, open and hackable test and measurement chassis? The four-channel Envox EEZ Bench Box 3 (BB3) includes includes two DCP405 advanced DC power modules and one DCM224 dual output supplementary DC power module (max. output power 465 W). It is a great solution for product development, debugging, and circuit testing.Features Modular design – use up to three modules in any combination 4.3' TFT color touchscreen display with customizable and responsive GUI Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A) Max. output power: 465 W Multiple output values views including YT-view for DCP405 modules Programmable lists Tracking mode OVP, OCP, OPP and OTP protection Speed controlled cooling fan SCPI programming via USB or Ethernet MicroPython scripting, Node-RED integration RTC with NTP synchronization MQTT support Easily programmable with 400+ SCPI commands Built-in Ethernet, USB and UART for remote control Build-in removable 8 GB micro SD card for data logging and programming Fast boot, FreeRTOS firmware Quiet operation thanks to multi-sensor fan speed control Software simulator Quick and easy upgrade of the DIB module’s firmware Easy maintenance, disassembling and repair Typical Applications Product development and debugging Laboratories and educational facilities Quality control and assessment Automobile electronic circuit testing Production automation testing Device or circuit characteristic verification and troubleshooting Technical Specifications STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out) Rotary encoder with switch 1x user switch 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0) Battery backup (CR2032 button cell type) USB FS OTG Ethernet PHY (10/100 Mbit/s) 32 KB I²C system EEPROM 8 MB SDRAM 8 GB Micro SD card 4.3' TFT color resistive touchscreen display with brightness control SWG/JTAG connector (optional) Small on-board speaker Four power relays for various power outputs coupling Full range autoswitch AC input (115 / 230 Vac) AC Soft-start (In-rush current limitation) and stand-by AC IEC C14 inlet with two 20 x 5 mm fuse AC power switch AC power input protection and EMI filter Standby LED indicator Ø80 mm DC cooling fan with speed control Kensington lock slot™ Compact size: 290 (W) x 123 (H) x 240 (D) mm Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

    Niet op voorraad

    € 899,00

    Leden € 809,10

  • Envox EEZ Bench Box 3 (BB3) 2-ch – Modular Test & Measurement Solution

    Envox Envox EEZ Bench Box 3 (BB3) 2-ch - Modular Test & Measurement Solution

    Niet op voorraad

    Need a modular, open and hackable test and measurement chassis? The two-channel Envox EEZ Bench Box 3 (BB3) includes two DCP405 advanced DC power modules (max. power 310 W). It is a great solution for product development, debugging, and circuit testing.Features Modular design – use up to three modules in any combination 4.3' TFT color touchscreen display with customizable and responsive GUI Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A) Max. output power: 310 W Multiple output values views including YT-view for DCP405 modules Programmable lists Tracking mode OVP, OCP, OPP and OTP protection Speed controlled cooling fan SCPI programming via USB or Ethernet MicroPython scripting, Node-RED integration RTC with NTP synchronization MQTT support Easily programmable with 400+ SCPI commands Built-in Ethernet, USB and UART for remote control Build-in removable 8 GB micro SD card for data logging and programming Fast boot, FreeRTOS firmware Quiet operation thanks to multi-sensor fan speed control Software simulator Quick and easy upgrade of the DIB module’s firmware Easy maintenance, disassembling and repair Typical Applications Product development and debugging Laboratories and educational facilities Quality control and assessment Automobile electronic circuit testing Production automation testing Device or circuit characteristic verification and troubleshooting Technical Specifications STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out) Rotary encoder with switch 1x user switch 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0) Battery backup (CR2032 button cell type) USB FS OTG Ethernet PHY (10/100 Mbit/s) 32 KB I²C system EEPROM 8 MB SDRAM 8 GB Micro SD card 4.3' TFT color resistive touchscreen display with brightness control SWG/JTAG connector (optional) Small on-board speaker Four power relays for various power outputs coupling Full range autoswitch AC input (115 / 230 Vac) AC Soft-start (In-rush current limitation) and stand-by AC IEC C14 inlet with two 20 x 5 mm fuse AC power switch AC power input protection and EMI filter Standby LED indicator Ø80 mm DC cooling fan with speed control Kensington lock slot™ Compact size: 290 (W) x 123 (H) x 240 (D) mm Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

    Niet op voorraad

    € 799,00

    Leden € 719,10

Ontdek de meetinstrumenten collectie van Elektor

Elektor is dé plek voor professionals en enthousiastelingen die zich bezighouden met elektronica. We bieden niet alleen een bron van onderwijs en inspiratie, maar ook een uitgebreid assortiment aan meetinstrumenten. Deze tools zijn essentieel voor iedereen die zijn projecten naar een hoger niveau van precisie wil tillen. Of je nu bezig bent met een complex ontwerp of een basiscomponent test, de meetinstrumenten van Elektor staan garant voor betrouwbaarheid en kwaliteit.

Essentiële meetinstrumenten voor jouw Projecten

Elektor begrijpt dat goede meetinstrumenten het hart vormen van elk elektronica project. Daarom hebben we een breed scala aan oscilloscopen, multimeters, signaalgeneratoren en meer in ons aanbod. Deze tools zijn zorgvuldig geselecteerd om te voldoen aan de behoeften van zowel de hobbyist als de professional. Met onze meetinstrumenten kun je met vertrouwen elke uitdaging op het gebied van elektronica aan.

In de snel veranderende wereld van elektronica is het cruciaal om toegang te hebben tot de nieuwste technologie. Onze meetinstrumenten zijn voorzien van de laatste ontwikkelingen op het gebied van elektronica, zodat je altijd vooroploopt. Bij Elektor vind je alles wat je nodig hebt om je elektronica projecten te ondersteunen, van eenvoudige tools tot geavanceerde meetapparatuur.

Meer dan alleen meetinstrumenten

Bij Elektor is het meer dan alleen het aanbieden van gereedschap; we bieden een gemeenschap en een platform voor kennisdeling. Naast meetinstrumenten biedt Elektor magazine ideeën, informatie en inspiratie voor je volgende project. We zijn een bron van innovatie voor elektronica-ontwerpers, zowel voor professioneel gebruik als voor hobbyprojecten.

Bestel bij Elektor voor jouw meetinstrumenten

  • Kwaliteit en Diversiteit: Een uitgebreid assortiment meetinstrumenten van hoge kwaliteit.
  • Scherpe Prijzen: Concurrerende prijzen met extra voordelen voor Elektor-leden.
  • Deskundigheid en Ondersteuning: Jarenlange ervaring in elektronica en een betrouwbare bron van kennis en inspiratie.

Bereid je voor op succes in je elektronica-projecten met de meetinstrumenten van Elektor. Bezoek onze collectie vandaag nog en vind de perfecte tools die passen bij jouw behoeften. Met Elektor kies je voor kwaliteit, innovatie en een community die net zo gepassioneerd is over elektronica als jij.

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan