ESP32

2 producten

Filteren

  • Arduino Nano ESP32 with Headers

    Arduino Arduino Nano ESP32 with Headers

    1 review

    The Arduino Nano ESP32 (with and without headers) is a Nano form factor board based on the ESP32-S3 (embedded in the NORA-W106-10B from u-blox). This is the first Arduino board to be based fully on an ESP32, and features Wi-Fi, Bluetooth LE, debugging via native USB in the Arduino IDE as well as low power. The Nano ESP32 is compatible with the Arduino IoT Cloud, and has support for MicroPython. It is an ideal board for getting started with IoT development. Features Tiny footprint: Designed with the well-known Nano form factor in mind, this board's compact size makes it perfect for embedding in standalone projects. Wi-Fi and Bluetooth: Harness the power of the ESP32-S3 microcontroller, well-known in the IoT realm, with full Arduino support for wireless and Bluetooth connectivity. Arduino and MicroPython support: Seamlessly switch between Arduino and MicroPython programming with a few simple steps. Arduino IoT Cloud compatible: Quickly and easily create IoT projects with just a few lines of code. The setup takes care of security, allowing you to monitor and control your project from anywhere using the Arduino IoT Cloud app. HID support: Simulate human interface devices, such as keyboards or mice, over USB, opening up new possibilities for interacting with your computer. Specifications Microcontroller u-blox NORA-W106 (ESP32-S3) USB connector USB-C Pins Built-in LED pins 13 Built-in RGB LED pins 14-16 Digital I/O pins 14 Analog input pins 8 PWM pins 5 External interrupts All digital pins Connectivity Wi-Fi u-blox NORA-W106 (ESP32-S3) Bluetooth u-blox NORA-W106 (ESP32-S3) Communication UART 2x I²C 1x, A4 (SDA), A5 (SCL) SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS) Power I/O Voltage 3.3 V Input voltage (nominal) 6-21 V Source Current per I/O pin 40 mA Sink Current per I/O pin 28 mA Clock speed Processor Up to 240 MHz Memory ROM 384 kB SRAM 512 kB External Flash 128 Mbit (16 MB) Dimensions 18 x 45 mm Downloads Datasheet Schematics

    Lees meer

    € 24,95

    Leden € 22,46

  • Arduino Nano ESP32

    Arduino Arduino Nano ESP32

    De Arduino Nano ESP32 (met en zonder headers) is een board met Nano afmetingen gebaseerd op de ESP32-S3 (ingebed in de NORA-W106-10B van u-blox). Het is het eerste Arduino bordje dat volledig op een ESP32 is gebaseerd, en beschikt over wifi, Bluetooth LE, debuggen via native USB in de Arduino IDE en een laag stroomverbruik.De Nano ESP32 is compatibel met de Arduino IoT Cloud en biedt ondersteuning voor MicroPython. Het is een ideaal board om aan de slag te gaan met het ontwikkelen van IoT.Kenmerken Compact formaat: ontworpen met de bekende Nano afmetingen in het achterhoofd maakt het compacte formaat van dit bordje hem perfect geschikt voor inbedding in stand-alone projecten. Wifi en Bluetooth: benut de kracht van de ESP32-S3 microcontroller, een bekende in de wereld van IoT, met de volledige Arduino ondersteuning voor draadloze en Bluetooth connectiviteit. Arduino en MicroPython ondersteuning: schakel naadloos tussen Arduino en MicroPython programmeren in slechts een paar eenvoudige stappen. Arduino IoT Cloud compatibel: bouw snel en eenvoudig IoT-projecten met maar een paar regels code. De veilige setup zorgt ervoor u uw project vanaf elke locatie kunt bewaken en besturen met behulp van de Arduino IoT Cloud-app. HID ondersteuning: simuleer human interface devices via USB, zoals toetsenborden of muizen, waardoor nieuwe opties voor interactie met uw computer mogelijk worden. Specificaties Microcontroller u-blox NORA-W106 (ESP32-S3) USB aansluiting USB-C Pinnen Ingebouwde led-pinnen 13 Ingebouwde RGB led-pinnen 14-16 Digitale I/O-pinnen 14 Analoge ingangspinnen 8 PWM-pinnen 5 Externe interrupts Alle digitale pinnen Connectiviteit Wifi u-blox NORA-W106 (ESP32-S3) Bluetooth u-blox NORA-W106 (ESP32-S3) Communicatie UART 2x I²C 1x, A4 (SDA), A5 (SCL) SPI D11 (COPI), D12 (CIPO), D13 (SCK). Alle GPIO’s te gebruiken voor Chip Select (CS) Voeding I/O-spanning 3,3 V Ingangsspanning (nominaal) 6 - 21 V Ingangsstroom per I/O-pin 40 mA Uitgangsstroom per I/O-pin 28 mA Kloksnelheid Processor Tot 240 MHz Geheugen ROM 384 kB SRAM 512 kB Extern flashgeheugen 128 Mbit (16 MB) Afmetingen 18 x 45 mm Downloads Datasheet Schema

    Lees meer

    € 23,95

    Leden € 21,56

The ESP32 is a chip designed for mobile, wearable electronics and Internet-of-Things (IoT) applications. It's packed with all the state-of-the-art low-power features you need, including clock gating, multiple power modes and dynamic power scaling.

Microcontroller with Wi-Fi and Bluetooth

The ESP32 is a highly integrated chip that combines Wi-Fi and Bluetooth capabilities with a powerful CPU and memory. It is ideal for applications that require low power consumption, such as sensors and wearable devices.

ESP32 offers two CPU cores that can be controlled separately, clocked up to 240 MHz, and each equipped with its own set of peripherals. In addition to the CPU cores, the ESP32 has a special Tensilica LX6 microprocessor for ultra-low power co-processing.

ESP32 module and applications

The ESP32 module can be used in different ways. The most popular ways to use the ESP32 in a project is:

ESP32 as Arduino compatible board

The ESP32 can be used as an Arduino compatible board. This means you can use the Arduino IDE to develop applications for the ESP32. The ESP offers users the ability to make WiFi and Bluetooth connections.

ESP32 as a standalone microcontroller

The ESP32 can also be used as a standalone microcontroller. This means you can develop applications for the ESP32 without using the Arduino IDE. The ESP32 is a good choice for many Internet of Things applications. The built-in WiFi and Bluetooth make it perfect for wireless applications.

Internet of Things projects with ESP32

The ESP32 is a great choice for many Internet of Things applications. The built-in WiFi and Bluetooth make it perfect for wireless applications. The ESP32 is also a very popular microcontroller for hobbyists. Some popular applications for the ESP32 are:

  • Home automation
  • IoT devices
  • Wearable electronics

Manual and books about ESP32

When you work with ESP modules for the first time, it is nice to receive an explanation so that you become familiar with the possibilities and projects with ESP32 technology. The Official ESP32 Book is a book that takes you step by step as a beginner. The Elektor ESP32 Smart Kit offers beginners everything they need to follow the projects in the book.

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak account aan